- On August 30, 2017
Whenever a small room lacks any windows, you can be sure to feel suffocated in it. Air won’t be able to flow inside and you would feel a lot less comfortable than what you’re used to. Plus, you can get sick if there isn’t any form of ventilation around. This is the reason why ventilation is very important in these small areas. With the proper ventilation, you can feel fresher and any unpleasant odor will be eliminated right away. This is especially true for bathrooms too due to its small amount of space. In order to ensure air is flowing freely into this important room, an exhaust fan installation is what you need.
Preparation for Installation
Getting a new ventilation fan and installing them in your bathroom isn’t as easy as you think it would be. Certain steps have to be done first before installing the actual fan unit. First off, you have to think where you’re going to place the ventilation fan and make some measurements of the whole operation. Once you have the exact measurements, your professional handyman can cut a hole in the wall or in your window’s structure to insert brackets that will hold your ventilation fan in place. Be prepared too because this will take some time. Even if one measurement goes wrong, the entire installation of your ventilation fan will be compromised.
Turn off the Power first
After the arduous process of getting the proper measurements and making an opening for the ventilation fan, your professional handyman can now install your bathroom’s ventilation fan. But before that happens, you need to turn off your house or workplace’s electricity supply. Since a ventilation fan uses electricity as its main source of power, installing it with your electrical supply turned on can be a huge risk for everyone. Plus, there is a lot of water inside your bathroom. Once it comes into contact with your ventilation fan’s wires, you can expect an accident will occur right away.
The Installation Proper
The power has now been turned off and the opening is ready for your ventilation fan assembly. To start, place the aforementioned assembly inside the opening and determine first if it’s a good fit. If it isn’t your handyman must make more room by cutting the opening with a saw. After which, you can now fasten the ventilation fan using brackets, screws, and clamps. Your handyman must double check every securing device to ensure your bathroom’s ventilation fan won’t loosen while it is operating. Of course, your bathroom’s electrical wires will also be connected to the fan itself to act as its main power source. Make sure every component of the ventilation fan is far away from any source of water, like faucets and showerheads, to prevent any electrical accident.
Installing a bathroom ventilation fan is no joke. It requires experience, a certain degree of expertise, and the knowledge on how to use the proper tools for the job. If you are not familiar with the whole process, the wisest choice you can do is call for a professional handyman for your exhaust fan installation needs. This will keep your mind at peace and provide the right kind of ventilation for your bathroom.